(765) 436-2203

Distributors

Hoosier Ag offers three Schlagel distributor options.Moving your grain accurately and efficiently is reliant on the performance of your distributor. Our distributors are designed to seamlessly direct your grain where it needs to go while preserving grain quality. Let us help you in finding the most efficient distributor for your system.

Syncrosetsyncroset

  • Compact Takes a minimum amount of space
  • Wear resistant Spout is lined with high carbon steel to provide wearing qualities better than 3/16” steel plate
  • Unrestricted flow Only one bend is required from inlet to outlet
  • Conical Design Makes it ideal for outside installation
  • Dust-tight Material stays within the unit
  • Rigidly supported bottom Keeps it from bending under the weight of spouting and provides excellent hanging facilities
  • Positive locking Actually enters the revolving spout into the outbound duct so it cannot spill material into adjoining outlets
  • No adjusting Once installed, you are ready for years of trouble-free service
  • Self-cleaning Any dust laying on the floor of the unit is cleaned away each time the unit is operated. Indexing bearing has a spherical face to force away any material in its path.

Click to view literature.

Optional Syncroset Features

  • Distributor The standard distributor’s inner spout and ducts are set to provide 45 degree flow path for the material. A taller distributor with a 60 degree flow path is available for handling materials such as feed. A 45 degree and 60 degree inner spouts are made oversize to ensure unrestricted flow of the material.
  • Flat Back Distributor Any style distributor can be made with a section of the round body cutaway. This enables you to position the distributor inlet up close to the discharge and trunking of a bucket elevator.
  • Fertilizer DistributorThe description for a fertilizer distributor is the same as on our standard distributor except for the following additions:
    1. All parts that move against one another, to affect the rotation of the inner spout, are made of type 304 stainless steel. This consists of the inlet collar and the top of the inner spout. The door frame is also made from stainless steel.
    2. The shaft used for the lifting and rotating of the revolving spout is made from the stainless steel and slides and rotates inside a UHMW bearing plate.
    3. The SyncroSet indexing bearing is made of graphite impregnated, high-impact phenolic and rotates on a stainless steel bushing.
    4. Stainless steel operating cable is provided for 50 feet of remote operation.
    5. As an option, complete sandblasting and epoxy coating of the exterior and interior of the unit is available.
  • Stainless Steel or Galvanized Steel Distributors Any style distributor can be ordered using either stainless steel (type 304 standard) or galvanized steel construction.
  • Heavy Duty On a heavy duty distributor, the inner spout is made with a removable urethane liner. The ducts are provided with a replaceable high carbon steel duct liner that just drops in place.
  • OverflowMaterial overflow can be handled by either a top-mounted overflow valve or by a built-in internal overflow on the bottom of the distributor.
  • Electrically Operated Electronic “EDI” Control is standard when ordering an Electric Distributor. Limit switch option is also available for SyncroSet and SwingSet Distributors.
  • Dust Seals We can provide seals that seal off both the bottom and top of the inner spout. The standard style of bottom dust seal only seals around the duct being fed but a full bottom seal is available.

 

SwingSet Distributorsswingset

SwingSet distributors are manufactured with single, double, triple and quadruple spouts.

  • 45° Distributor This is the standard distributor supplied. It is used with whole grains, fertilizer and free flowing feed products.
  • 55° Distributor The 55 degree distributor is used whenever you have a sluggish product such as mixed feed with fat or molasses in it. These units average about 30% taller than a 45 degree unit. If you are handling both free flowing and sluggish materials, you may be able to use a 45 degree distributor by only running the sluggish material through the ducts closest to the center and the free flowing products through the outer ducts.
  • Fertilizer Distributor The construction of a fertilizer distributor is the same as an all mild steel distributor except for the following additions:
  1. All parts that move against one another, to affect the swinging of the inner spout, are made of type 304 stainless steel. This consists of the inner spout, spout flexes, spout latch plate, hanger, shields and pivot rods for flexes.
  2. The interior roller chain is stainless steel.

    Click to view literature.

  3. Stainless steel operating cable is provided for 50 feet of operation.
  4. As an option, complete sandblasting and epoxy coating of the exterior and interior of the unit is available.

Optional SwingSet Features
Any style distributor can be ordered using either stainless steel (type 304 standard) or galvanized steel construction.

  • Standard Duty The inner spout and spout flexes are 10 gauge mild steel. The outlet ducts are 12 gauge mild steel. No liners are used.
  • Medium Duty The inner spout and spout flexes are 10 gauge mild steel with 3/16 inch abrasion resistant steel liners on the bottom surfaces. The outlet ducts are 12 gauge mild steel without any liner.
  • Heavy Duty The inner spout and spout flexes are 10 gauge mild steel with 3/16 inch abrasion resistant steel liners on the bottom surfaces. The outlet ducts are 12 gauge mild steel and are provided with a high carbon steel replaceable liner.
  • Electrically Operated Electronic “EDI” Control is standard when ordering an electric Distributor. Limit switch option is also available for SyncroSet and SwingSet Distributors.
  • Oversize Duct Outlets Oversize discharge ducts are available to allow you to feed into a specific duct with more than one inner spout simultaneously. An example would be an 8 inch double distributor with one duct having a 12 inch diameter opening rather than the normal 8 inch diameter.

RotarySet Distributorsrotaryset

  • RotarySet Distributors are manufactured with single, double and triple spouts.
  • Options include replaceable lining in the inner spouts and ducts, electric operators and special flanging.
  • Easy installation and parts access was of primary concern in the design of this distributor. The design provides a weather and dust tight enclosure.
  • All distributors are fully assembled and operated in our plant. They may be split into sections as necessary for shipping and handling.
  • On manual units the spout locking mechanisms positively engage in laser cut indexing rings ensuring error free positioning and eliminates mixing between adjacent ducts.
  • On electric units an innovative Electronic Distributor Interface (EDI) Control is used with cold weather proximity sensors was developed to not only allow rapid field installation and reduced wiring costs but also to allow you to name and number spout positions in the field to match your specific bin layout.
  • Round flanged inlets and ducts (outlets) conform to standard spouting methods, ruling out the need for special transitions.
  • Numerous openings afford easy access to the inside for inspection and maintenance. All internal working parts may be removed with minimal disassembly. Lining or relining of ducts can be done in place.

    Click to view literature.

  • The center pipe of the upper spout has a special double wall construction that prevents material contamination through the lower spout in the event that the upper spout wears a hole in the center pipe. Manual or electric controls Easy weather tight field assembly Single adjustment for each spout Ball bearing mountings for all spouts 52 degree feed models available Full capacity at all positions
  • Optional 100% overflow on all spouts
  • Painted, galvanized or stainless steel construction

Standard and Optional RotarySet Features

  • 45Þ Distributor This is the standard distributor supplied. it is used with whole grains, fertilizer and free flowing feed products.
  • 52Þ DistributoThe 52 degree distributor is used whenever you have a sluggish products such as mixed feed with fat or molasses in it.
  • Stainless Steel or Galvanized Steel Distributors Any style distributor can be ordered using either stainless steel (type 304 standard) or galvanized steel construction.
  • Standard Duty The inner spouts are lined on the bottoms and 3/4 up the sides with 3/16″ A.R. steel. No liners in ducts.
  • Heavy Duty Includes all standard duty lining options plus the ducts are lined with 14 GA A.R. steel.
  • Extra Heavy Duty  The inner spouts are lined on the bottoms and 3/4 up the sides with 1/4″ Urethane. Ducts are fully lined with 1/4″ Urethane.
  • Severe Duty Various lining materials available in customer specified ares.
  • Electrically Operated Electronic “EDI” Control options are shown in the EDI section